Cheflogic Programmable Controller - Electrolux EOC633 Instructions For Use Manual

SIMPRD 342-1-483 1/3/06
C O O K I N G W I T H Y O U R T I M E R
4. Set the cooking duration you want by using the – or + buttons. 5 seconds after the last change,
the "cooktime indicator"
NOTE: Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press the "mode" button until the "end time indicator"
4. Enter the time of day you want to finish cooking by pressing the – or + buttons. 5 seconds after
the last change, the "end time indicator"
be displayed.
Setting the delayed start cooking time
1. Program the "cook time" and "end time" as described in the relevant sections. Once both the
"cook time" and "end time" have been set, the "cook time" and "end time indicators" will stop
flashing and the current time of day will be displayed.
On completion of cooking
The heat source will turn off, the timer will beep and the "end time" and/or "cook time"
indicators will flash.
1. Turn the function and temperature controls to the off position.
2. Press any button to stop the timer from beeping.
Switching the clock display ON and OFF
1. Press any two buttons together for 2 seconds to switch 'off' the display.
2. Press any button to switch the clock display 'on' again.
NOTE: If a timer mode is set, then it is not possible to switch the display off.
C H E F L O G I C p r o g r a m m a b l e c o n t r o l l e r
Setting the time of day
After the appliance has been electrically connected
the "set clock" symbol
flash on the clock display, along with the scrolling
message "Welcome to Electrolux".
1. To set the time of day in hours and minutes press
the – or + buttons. 5 seconds after the last change
the "timer arrow"
the time has been set.
NOTE: The clock has a 24-hour display.
Setting the oven function
1. Switch on the appliance by pressing the "ON / OFF" button. The oven lights will light.
2. Press the "function" button as many times as necessary until the desired function appears. The
suggested cooking temperature appears in the display and the degrees symbol "°" flashes. If
the suggested temperature is not changed within approximately 5 seconds the degrees symbol
"°" stops flashing and the oven begins to heat. The suggested temperature display is replaced
with the oven centre temperature and a thermometer icon. The thermometer icon rises slowly,
indicating the degree to which the oven is currently being heated.
20
11:00 AM Page 20
will stop flashing, and the time of day will be displayed.
and "timer arrow"
will disappear, confirming
begins flashing.
will stop flashing and the current time of day will
will