Table of Contents
Advertisement
• microwave and impigment percentages for each cooking
stage.
NOTE!
Before to start the cooking cycle, it is possible to
change the programme settings and start the
programme with new values, if Show Recipe
Details in Appliance Setting is enabled.
Be careful that the new recipe settings will not be
overwritten in the original recipe!
Touch and hold the temperature sensor icon
instant cavity temperature.
G.4.14 Use Expiration
Touch the "Use Expiration" button to set up the use time of the
appliance. Expired the set time, it is necessary to type a
password to unlock the appliance.
Use Expiration
• Select "YES" to enable this function;
• insert the passcode;
– min 1 character;
– max 6 characters.
IMPORTANT
Do not start the passcode with "0".
• set last available day to use the appliance.
Use Expiration
Expiration
Passcode
Expiration
Date
G.4.15 Recipe Barcode Enabled
Touch the "Recipe Barcode Enable" button to enable or disable
the option of recalling the recipe by reading a barcode with a
barcode scanner.
Recipe Barcode
Enable
IMPORTANT
• When creating a new recipe in the "Recipe
Setting" menu, it must be saved including the
barcode field.
• Appliance keyboard on the display and barcode
are case sensitive.
• To enable this function, insert the Bluetooth USB
drive of the barcode scanner into USB port.
Refer to F.4.1 USB port for the instructions.
G.4.16 Alarm Type
Touch the "Alarm Type" button to have the possibility to set a
pop-up alert at the end of:
• each cooking stage ("Stage");
• preset time ("Time").
Please refer to G.5 Recipe Setting.
Alarm Type
G.4.17 Preheat Low Fan Speed
Touch the "Preheat Low Fan Speed" button to set the fan
speed during the idle time of the appliance.
24
to verify the
No
88888
31/12/2023
On
Stage
Preheat Low Fan
Speed
Touch this button repeatedly to increase the speed of the fan.
The display shows immediately the new setting.
Once you reach the highest value, it starts again from the
lowest one.
• 10%= min
• 100% = max
G.4.18 Preheat Hi Fan Speed
Touch the "Preheat Hi Fan Speed" button to set the fan speed
during the preheat phase.
Preheat Hi Fan
Speed
Touch this button repeatedly to increase the speed of the fan.
The display shows immediately the new setting.
Once you reach the highest value, it starts again from the
lowest one.
• 10%= min
• 100% = max
NOTE!
When the Energy Save Mode is activated the
cavity fan starts according to the parameter value
set in "Preheat Hi Fan Speed".
G.4.19 Cool Down Fan Speed
Touch the "Cool Down Fan Speed" button to set the fan speed
during the cool down phase.
Cool Down Fan
Speed
Touch this button repeatedly to increase the speed of the fan.
The display shows immediately the new setting.
Once you reach the highest value, it starts again from the
lowest one.
• 10%= min
• 100% = max
G.5
Recipe Setting
Touch the back icon
to go back in the main settings menu.
Recipe Setting
System
Service
Appliance
Factory
Touch the "Recipe Setting" button to manage recipe settings.
Recipe Setting
The display shows all the recipes stored into the appliance.
50%
10%
100%
Advertisement
Table of Contents
