Table of Contents
Advertisement
Electronic programmer
1
Function Indicators
2
Time display
3
Function Indicators
4
Button " + "
5
Selector Button
6
Button " - "
CLOCK FUNCTIONS
Clock function
Time of day
Minute minder
Duration
and off automatically later. In this case first set Duration
Setting the clock functions
1. Set an oven function and temperature (necessary only for Duration and End).
2. Push the Selection button again and
again until necessary function indicator
flashes.
3. To set the time for Minute minder
ration
button.
The related function indicator comes on.
When the time period is completed, the
function indicator flashes and an acous-
tic signal sounds for 2 minutes.
With the functions Duration
4. Push any button to stop the signal.
5. Turn the oven functions control knob and the temperature control knob to off position.
Shows the time. To set, change or check the time.
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration
To set how long the oven has to be in operation.
End
To set the switch-off time for an oven function.
and End
can be used at the same time, if the oven is to be switched on
, use " + " or " - "
or End
1
6
, Du-
and End
the oven stops automatically.
Clock functions
2
5
Application
, then End
11
3
4
.
Advertisement
Table of Contents
