Operating Sequence - Electronic Control Oven - Electrolux e:line EOEM61AS User Manual

14 operating sequence – electronic control oven (except EOEK62AK) electrolux e:line ovens
Operating sequence –
electronic control oven (except EOEK62AK)
Turning the oven on
• Switch on the oven by pressing the "ON/OFF" button.
The LCD control panel will come on and inform you that
you need to select a cooking function.
• If you do not select a function within 8 seconds the oven
will turn off.
Selecting the cavity (EUEE63AS & EDEE63AS only)
Your oven may be equipped with two cavities. On these
models, use the cavity selector button to toggle between
the upper and lower cavity of your oven.
• Select which cavity to use by pressing the "upper/lower"
button. The oven cavity icon on the LCD control panel
will tell you which oven is currently active.
Note:
• T he lower oven cavity does not have as many functions
as the upper oven cavity.
Select a cooking function
Your oven will have a selection of functions. Refer to the
inside front cover of this manual to confirm what functions
are available to you.
• Press the "function
times as necessary until the desired function appears.
• Cooking suggestions will appear under the function
name and suggested cooking temperatures will appear
above the temperature selector.
• If no other button is touched within 8 seconds the
oven will switch on and begin to heat up to the
displayed temperature.
EMAN_ELineOven_Aug09.indd 14
" or function " buttons as many
Selecting a temperature
The temperature in you appliance is electronically controlled.
• The temperature can be selected within the range of
30°C to 250°C and can be adjusted at any time. To
set the temperature, press the temperature " " and
temperature " " buttons to reach the desired setting.
• If no further changes are made within 8 seconds the
oven begins to heat. The heating indicators above the
temperature selector will come on and start to rise
slowly, indicating the degree to which the oven
is currently being heated.
• When the temperature is reached, the indicator bars are
fully lit, the heat source switches itself off and the buzzer
will play a short sound. When the oven temperature falls
below the desired setting, the heating source switches
back on.
tips and information
Pre-heating your oven is recommended in several cooking
and grilling functions. Pre-heating your appliance allows it
to reach the required temperature quickly and efficiently as
well as cook your food at the correct temperature for the
entire cook time.
The programmable controller models are equipped with
a built-in rapid heat-up that activates each time you start
an oven function. During the rapid heat-up phase the heat
comes from the element surrounding the fan as well as
the smaller element above the food. This combination will
heat up your oven 30% quicker than it would on standard
"Bake". The oven will automatically revert to the set cooking
function once the preset temperature is reached.
Turning the oven off
Single cavity models:
1. Press the ON/OFF button to switch off the oven.
Dual cavity models:
1. Press the upper/lower cavity selector button to toggle to
the desired cavity.
2. Press the ON/OFF button to switch off the desired
cavity. The LCD control panel will come off to confirm
that the cavity is now switched off.
3. If the other cavity is still active, after 1 second, the LCD
control panel will automatically revert to show the setting
of that cavity.
4. To turn off both cavities at once, press and hold the On/
Off button for 1 second. All elements, cavity light and the
LCD control panel will then switch off at the same time.
19/8/09 4:46:22 PM