Troubleshooting - Electrolux e:line EOEM61AS User Manual

Built in ovens
Hide thumbs Also See for e:line EOEM61AS:
Table of Contents

Advertisement

30 troubleshooting electrolux e:line ovens

Troubleshooting

Faults
If there is a problem with the oven and/or grill, please:
• Check the points listed below before calling for service.
• It may be possible to avoid a call by fixing the problem yourself – and so continue cooking.
Note:
• We may charge for service even in the guarantee period if your problem is due to the causes listed below.
problem
Oven or grill not working
Oven light not working
Oven not heating enough
Clock flashing on display
Unit smoking when first used
Condensation build up
Door cannot be replaced
after removal
Pyrolytic cycle not working
Functions and temperature
appear on display but oven
does not work
Data plate
When you need information, service or spare parts please be prepared to tell us the:
• Model
• Model number
• Serial number shown on the data plate. The data plate is visible when the oven or grill door is open.
Customer Care Centre
If you need more information, please contact the Customer Care Centre:
Australia – 1300 363 640, 8am-5pm EST Mon-Fri.
New Zealand – +649 573 2384, 8am-5pm EST Mon-Fri.
If you have a warranty or spare parts enquiry, you should call the number listed on the back page.
EMAN_ELineOven_Aug09.indd 30
possible cause
Time of day is not set
Power is not turned on
Controls are incorrectly set
Household fuse has blown or power supply is off (If the household fuse continues to blow, call the
Service Centre)
Child-proof oven lock is activated (Refer to operating instructions)
Lamp blown or loose socket
Household fuse has blown (If the household fuse continues to blow, call the Service Centre)
Foil trays on bottom of oven
Timer is in 'AUTO' mode. (Refer to operating instructions)
Household fuse has blown (If the household fuse continues to blow, call the Service Centre)
Oven is in 'Demo mode'. Turn the oven off, then press the - and + buttons underneath cook time,
at the same time. 'Normal mode' should now be displayed
Power failure or interruption
Reset time of day and any cooking functions you were using. (Refer to CLOCK operating instructions)
Protective oils being removed (see page 6)
Reduce the amount of water used in cooking. (Sometimes condensation is normal)
Stirrup not engaged properly
All accessories must be removed from the oven see page 27
Oven is in 'Demo' mode, refer to Additional Functionality on page 17
19/8/09 4:46:27 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents