The Electronic Oven Control; General Information - Electrolux EOB 946 Instruction And Installation Manual

Table of Contents

Advertisement

The electronic oven control
Temperature indicator
Oven functions
Rotary knob for
function setting
Control lamp
On/Off
General information
Functions
e
Daytime
The setting is described in chapter
"Prior to first use".
e@
Oven function selection
e
Oven temperature selection
e
Short-term alarm
e
Automatic program Cooking time
e@
Automatic program Switch-off time
e
Temperature automatism with the meat probe
Setting duration 5 seconds
Any setting performed will within 5 seconds be taken
over by the electronic control and possibly started.
With initial settings it may happen that, within this short
Period of time, you will not have completed yet the
setting step next to follow. By repeated pushing of the
corresponding button you may reactivate the desired
setting procedure and continue.
Oven cooling fan
After switch-off the appliance will continue to run until
the oven temperature has dropped below about
160
°C.
O — push buttons —-
O
Indication of daytime and time
settings
TA
Rotary knob for
temperatur and
time setting
Control lamps for
time setting
_ With the function setting knob the
_ desired oven function has to be set:
turn to the right or to the left to the|
desired
function.
The
function
symbol lights up.
Daytime, short-term alarm, automa-
tic time settings must be set by tur-|
ning the rotary knob on the right side:
turn
to the left or to the right
= higher, /7 = lower.
Pushing
the button
switches
the
oven on or off. The switch-on control
lamp and the oven light come on.
After actuation of the button the oven!
temperature desired may be set with
the buttons A. or
Setting of sequences of time without
any switching on/off effect.
Setting of the duration of cooking!
time. The function starts at once and)
is automatically switched off after|
lapse of the time set.
Setting of the end of the cooking
time. The oven is switched off at the!
time set.
An automatic switching on and off at|
preset times is possible by combination
of programs cooking time and switch-off
time.

Advertisement

Table of Contents
loading

Table of Contents