Operating Sequence - Electronic Control Oven - Electrolux e:line EOEM61CS User Manual

14 operating sequence – electronic control oven
Operating sequence –
electronic control oven
Turning the oven on
• Switch on the oven by pressing the "On/Off" button.
The LCD control panel will come on and inform you that
you need to select a cooking function.
• If you do not select a function within 8 seconds the oven
will turn off.
Selecting the Upper or Lower oven
(EDEE63CS, EUEE63CS & EUEE63CK only)
Your model may be equipped with two ovens. On these
models, use the oven selector button to toggle between the
upper and lower ovens.
• Select which oven to use by pressing the "upper/lower"
button. The oven cavity icon on the LCD control panel
will tell you which oven is currently active.
Note:
• T he lower oven cavity does not have as many functions
as the upper oven cavity.
Select a cooking function
Your oven will have a selection of functions. Refer to the
inside front cover of this manual to confirm what functions
are available to you.
• Press the "function
times as necessary until the desired function appears.
• Cooking suggestions will appear under the function
name and suggested cooking temperatures will appear
above the temperature selector.
• If no other button is touched within 8 seconds the
oven will switch on and begin to heat up to the
displayed temperature.
electrolux e:line ovens
" or function " buttons as many
Selecting a temperature
The temperature in your appliance is electronically
controlled.
• The temperature can be selected within the range of
30°C to 250°C and can be adjusted at any time. To
set the temperature, press the temperature " " and
temperature " " buttons to reach the desired setting.
• If no further changes are made within 8 seconds the
oven begins to heat. The heating indicators above the
temperature selector will come on and start to rise
slowly, indicating the degree to which the oven
is currently being heated.
• When the temperature is reached, the indicator bars are
fully lit, the heat source switches itself off and the buzzer
will play a short sound. When the oven temperature falls
below the desired setting, the heating source switches
back on.
tips and information
Pre-heating your oven is recommended in several cooking
and grilling functions. Pre-heating your appliance allows it
to reach the required temperature quickly and efficiently as
well as cook your food at the correct temperature for the
entire cook time.
The programmable controller models are equipped with
a built-in rapid heat-up that activates each time you start
an oven function. During the rapid heat-up phase the heat
comes from the element surrounding the fan as well as
the smaller element above the food. This combination will
heat up your oven 30% quicker than it would on standard
"Bake". The oven will automatically revert to the set cooking
function once the preset temperature is reached.
Turning the oven off
Single cavity models:
1. Press the On/Off button to switch off the oven.
Dual cavity models:
1. Press the upper/lower oven selector button to toggle to
the desired oven.
2. Press the On/Off button to switch off the desired oven.
The LCD control panel will come off to confirm that the
oven is now switched off.
3. If the other oven is still active, after 1 second, the LCD
control panel will automatically revert to show the setting
of that oven.
4. To turn off both ovens at once, press and hold the
On/Off button for 1 second. All elements, cavity light
and the LCD control panel will then switch off at the
same time.