Table of Contents
Advertisement
14 operating sequence – electronic control oven electrolux e:line ovens
Operating sequence –
electronic control oven
Turning the oven on
• S witch on the oven by pressing the "ON/OFF" button.
The LCD control panel will come on and inform you that
you need to select a cooking function.
• I f you do not select a function within 8 seconds the oven
will turn off.
Selecting the Upper or Lower oven
(EDEE63CS, EUEE63CS & EUEE63CK only)
Your model may be equipped with two ovens. On these
models, use the oven selector button to toggle between the
upper and lower ovens.
• S elect which oven to use by pressing the "upper/lower"
button. The oven cavity icon on the LCD control panel
will tell you which oven is currently active.
Note:
• T he lower oven cavity does not have as many functions
as the upper oven cavity.
Select a cooking function
Your oven will have a selection of functions. Refer to the
inside front cover of this manual to confirm what functions
are available to you.
• P ress the "function " or function " buttons as many
times as necessary until the desired function appears.
• C ooking suggestions will appear under the function
name and suggested cooking temperatures will appear
above the temperature selector.
• I f no other button is touched within 8 seconds the
oven will switch on and begin to heat up to the
displayed temperature.
Selecting a temperature
The temperature in your appliance is electronically
controlled.
• T he temperature can be selected within the range of
30°C to 250°C and can be adjusted at any time. To
set the temperature, press the temperature " " and
temperature " " buttons to reach the desired setting.
• I f no further changes are made within 8 seconds the
oven begins to heat. The heating indicators above the
temperature selector will come on and start to rise
slowly, indicating the degree to which the oven
is currently being heated.
• W hen the temperature is reached, the indicator bars are
fully lit, the heat source switches itself off and the buzzer
will play a short sound. When the oven temperature falls
below the desired setting, the heating source switches
back on.
tips and information
Pre-heating your oven is recommended in several cooking
and grilling functions. Pre-heating your appliance allows it
to reach the required temperature quickly and efficiently as
well as cook your food at the correct temperature for the
entire cook time.
The programmable controller models are equipped with
a built-in rapid heat-up that activates each time you start
an oven function. During the rapid heat-up phase the heat
comes from the element surrounding the fan as well as
the smaller element above the food. This combination will
heat up your oven 30% quicker than it would on standard
"Bake". The oven will automatically revert to the set cooking
function once the preset temperature is reached.
Turning the oven off
Single cavity models:
1. Press the ON/OFF button to switch off the oven.
Dual cavity models:
1. P ress the upper/lower oven selector button to toggle to
the desired oven.
2. Press the ON/OFF button to switch off the desired oven.
The LCD control panel will come off to confirm that the
oven is now switched off.
3. I f the other oven is still active, after 1 second, the LCD
control panel will automatically revert to show the setting
of that oven.
4. To turn off both ovens at once, press and hold the
On/Off button for 1 second. All elements, cavity light
and the LCD control panel will then switch off at the
same time.
electrolux e:line ovens cooking with the timer – electronic control oven 15
Cooking with the timer –
electronic control oven
Your oven is equipped with a programmable controller that
can be used to turn on and off the oven automatically.
The cook time is used to automatically turn the oven off
after a set amount of time.
Setting the cook time
1. Select the desired oven function and cooking
temperature.
2. P ress the "cook time " button as often as necessary,
until the desired cook time has been set.
3. A fter 8 seconds from the last time adjustment your oven
will be programmed and will start cooking.
Note:
• D uring cooking, you can adjust the cook time with
the Cook time or buttons for better cooking
performance.
Setting the start/stop time
The start/stop time can be used to switch the oven On and
Off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking
temperature.
3. Set the required cook time.
4. P ress the "start/stop" time
button to move the start
and stop time forward.
5. A fter 8 seconds from the last time adjustment the
DELAY SET icon will light and your oven is now
programmed.
The oven will start cooking when the time of day reaches
the set start time.
Note:
• 3 0 seconds after a programmed cooking function has
started, it is no longer possible to delay the start time.
• I n order to delay a cooking function that has already
started, the oven needs to be switched Off using
the ON/Off button, then switched on again and
re-programmed.
On completion of cooking
When the cook time has elapsed, an audible signal
will sound for 10 seconds, the oven will switch off and
COOKING FINISHED will be displayed on the left hand side
of the display. On the right hand side of the display, the
remaining time indication "0 min" will appear together with
the cooking start and stop time.
• T o stop the audible signal, press any of the buttons on
the control panel.
• I f you wish to cook a bit longer, press the "cook time "
button for each additional minute you require. The oven
automatically reverts to the function and temperature
previously programmed. This feature is available for 5
minutes after cooking has finished. After that, the oven
automatically switches off.
tips and information
Even though the heating element turns off the oven will still
retain substantial heat. This will continue to cook the food
until it is removed or the oven cools down. If you do not
plan on being present when the oven turns off, you should
take this extra heating time into account.
Setting the timer
The timer can be used independently of the oven for setting
a countdown period. When the period of time has elapsed,
an audible signal sounds.
1. Press the timer button.
2. Set the desired length of time using the
or
whilst the timer bell is flashing. After 8 seconds from the
last adjustment the timer bell will stop flashing and the
timer will start to count down.
3. W hen the set time has elapsed, an audible signal will
sound for 10 seconds. The time indication "0 min" and
the timer bell will flash on the display.
4. To stop the signal, press any of the 3 buttons below the
Clock/Timer display.
Note:
• This feature has no effect on the oven operation.
buttons
Hide quick links:
Advertisement
Table of Contents
