Table of Contents
Advertisement
Installation
Any work required on the cooker
must be carried out by a
EXPERT
and corners with which you do not
normally come into contact, can be
U
sharp.
cooker.
When delivered, the cooker is adapted to a
bench height of 900 mm. The cooker has a
telescopic plinth. You can change the height
so that the cooker suits a bench height from
848 mm up to 933 mm.
Take care when positioning the cooker so
that it does not block the ventilation outlets
(behind the cooker and above the hood). The
cooker must not be pushed in under a tiled
edge or similar.
The cooker must have a bench area on
both sides (see "Safety").
Make sure that the cooker cable is not
crushed when the cooker is moved.
QUALIFIED
. The cooker is heavy. Edges
when moving the
SE GLOVES
6
Advertisement
Table of Contents
