Electrolux EKC60154 User Manual page 17

Using grids, plates and roasting pans
It is important for the oven grid, the baking
plate and the roasting pan to be fixed
between the stops at the front and rear edges
of the rails to prevent them from falling off
the rails. The locating pin engages in a slot
under the edge of the baking plate or
roasting pan which keeps the plate or
roasting pan in position. The rails must be in
their pushed-in position when the grid, plate
or roasting pan is inserted. For the best shelf
stability, make sure that the bevelled edge
faces forward in the oven. Pull the
accessories out carefully during use so that
the shelves/roasting pans or tins do not fall
off the rails. Maximum load 20kg (44 lb.).
Oven grid
First position the oven grid at the rear end,
since this makes it easier to fix the front end.
The locating pin is not used for the grid.
The oven grid has a marking on its upper
surface. This marking must be at the front
(towards the oven door) when in use. Make
sure that food placed on the grid is
positioned behind the marking. Otherwise
there is a risk that it will not be cooked
properly at the front.
The grid can be placed in the roasting pan.
The maximum weight to be placed on the
grid is 10kg (22 lb.).
NOTE! Make sure that the locating
pin hooks in under the edge of the
shelf/roasting pan and that the shelf/
roasting pan rests on the rails,
otherwise it can fall off the rails in the
pulled-out position. When the shelf/
roasting pan is removed in the pulled-
out position, the rails must be pushed
back again so that the oven door can
be closed. Use oven gloves because
the rails are hot.
16