Weighing Units; Units - A&D GF-30K Instruction Manual

5. Weighing Units

5-1. Units

With the balance, the following weighing units and weighing modes are available :
Counting mode
g kg
DS MS
Density mode (To use this mode, it must be stored in the function table as described on the next
Programmable-unit. No unit displayed. Refer to "13. Programmable Units" for details.
A unit or mode can be selected and stored in the function table as described in "5-2.Changing
the Units".
If a weighing mode (or unit of weight) has been turned off, that mode or unit will be missing in
the sequence. Tael has four varieties, one of which can be selected and installed at the factory.
To select a unit or mode for weighing, press the
For details about the units and modes, see the table below:
Name (unit, mode)
Gram
Kilogram
Counting mode
Percent mode
Ounce (Avoir)
Pound
Pound/Ounce
Troy Ounce
Metric Carat
Momme
Pennyweight
Grain (UK)
Tael (HK general, Singapore)
Tael (HK jewelry)
Tael (Taiwan)
Tael (China)
Tola (India)
Messghal
Density mode
Programmable-unit (Multi-unit)
Note The unit Grain is not available for the GX-32K and GF-32K.
Percent mode
pcs % OZ
t TL GN
page. For details about this mode, refer to "15. Density Measurement".
To select this mode, press the
the unit "g" displayed. " " appears only when the density value is displayed.)
Abbre-
viation
g
kg
pcs
%
OZ
Lb
OZ
L
OZt
ct
mom
dwt
GN
TL
t
MS
DS
show the density
Mlt
Lb OZ OZt
L
dwt mom
key until the processing indictor blinks with
MODE
key.
MODE
Function table
Display
(Storing mode)
pcs
l0
is used to
-
12
ct
Conversion factor
1 g =
1000 g
-
-
28.349523125 g
453.59237 g
1 Lb = 16 oz,
1 oz = 28.349523125 g
31.1034768 g
0.2 g
3.75 g
1.55517384 g
0.06479891 g
37.7994 g
37.429 g
37.5 g
31.25 g
11.6638038 g
4.6875 g
-
-
1 g