Accumulation Function - A&D GF-30K Instruction Manual

6-5. Accumulation Function

The accumulation function sums the weighing data and displays the total value.
To use the accumulation function, set the "Accumulation function (
function table as described below.
Note
While the accumulation function is in use, the data memory function is not available.
When using the accumulation function, make sure that the "Data memory (
parameter of the function table is set to "
Selecting The Unit
Step 1 Press the
used for accumulation.
Note While the accumulation function is in use, unit
selection using the
Setting The Function Table
Step 2 Press and hold the
of the function table is displayed, then release
the key.
Step 3 Press the
Step 4 Press the
display
add 0
Step 5 Press the
Note To disable the accumulation function, set the
"Accumulation function (
Step 6 Press the
Step 7 Press the
mode.
key to select a unit to be
MODE
key is not available.
MODE
SAMPLE
key.
PRINT
key several times to
SAMPLE
.
key to display
RE-ZERO
)" parameter to "
add
key to store the setting.
PRINT
key to return to the weighing
CAL
0
".
key until
ba5fnc
.
add 1
".
0
20
)" parameter of the
add
Weighing mode
Selected unit
Press and
hold the key
Press the key
several times
Weighing mode
data
)"