Programming a 7 Day Residential Schedule
The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to
use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule.
Setting All 7 Days at Once (SpeedSet
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
1. Hold the PROG button for 3 seconds. The display will
switch to SpeedSet programming mode. All 7 days
of the week will appear and the hour will be flashing.
2. Press SYSTEM to select HEAT or COOL.
3. Press the SpeedBar
for the MORN (morning) event. Press PROG.
4. Press the SpeedBar up or down to adjust the minute
for the MORN event. Press PROG.
5. Press the SpeedBar up or down to adjust the
temperature for the MORN event. Press PROG.
6. Press the SpeedBar up or down to adjust the fan
setting for the MORN event. Press PROG.
7. Repeat steps 3-6 for the DAY, EVE and NIGHT events.
8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
9. Press RETURN to exit.
User Manual
up or down to adjust the hour
®
)
®
14
FAN AUTO
DAY/TIME