Special Note For Loading Narrow Cut Sheet Paper; Special Note For Loading Dark Colored Forms - AMT Datasouth Accel-7450 User Manual

Special Note for Loading Narrow Cut Sheet Paper

To load cut sheets narrower than 4 ½ inches, disable menu item #25
PAPER SKEW DETECT. Refer to Control Panel operation on page 19 .

Special Note for Loading Dark Colored Forms

Excessive top/left margins or paper not loading may be caused by forms with
non-reflective or colored areas. Use the special DARK FORM LOAD feature to
print such forms. To get started, make sure at least one (1) reflective (white or
light colored) form has been loaded and ejected since the printer was last
powered up or since the left paper guide was moved. This step sets the left
starting print position in the printer's memory.
 Press the
 Fully insert the form into the paper slot until it seats square in the feed
rollers BEFORE the printer starts loading.
 Eject the form and start over if the form is not grasped immediately as the
printer will not automatically compensate for the top starting print position.
 Send the print job.
Press the ALT+EJECT/LOAD keys again to load each dark form. The printer
reverts to normal (white or light colored) paper loading after each load.
The SKEW: NO setting can be re-instated by
performing an initialization #1(press HIGH
IMPACT+LF keys and cycle ON power).
keys. The LCD shows DARK FORM LOAD.
- 14 -
ACCEL- 7450