Error Messages - AMT Datasouth Accel-7450 User Manual

Error messages

Function errors
Function errors indicate a serious problem that cannot be recovered by
the user. The printer can report 12 types of functional errors.
When a function error occurs, turn the power off, remove paper from
inside the printer then turn the printer back on.
If the message remains after the above procedure, contact AMT
Datasouth for assistance.
Operational error message
HEAD PROTECTION
PARK ERROR
PAPER OUT
FUNCTION
ERROR 1~12
 ONLINE lamp blinks. The print head has
become too hot during high-density printing.
When this message is displayed, printing speed
is reduced or printing stops. When the print head
temperature drops, the printer resumes normal
printing.
 Indicates fanfold paper is not fed back to the
parking position properly. Remove and reload
paper.
 Fanfold paper is not loaded in the rear tractor.
Install fanfold paper in the rear tractor and
press the ONLINE key.
 A cut sheet is not loaded into the printer. Put a
cut sheet on the front rack and load it into the
printer.
- 41 -
ACCEL-7450