Cleaning The Oven - Electrolux EKC70751 User Manual

Hide thumbs Also See for EKC70751:
Table of Contents

Advertisement

Cleaning the oven

in order to facilitate cleaning, the step units
or baking plate rails should be removed, see
page 49.
Removing the rails
The baking plate rails are removed in the
same way as the step unit, see page 49.
T
HE CATALYSIS ENAMEL
top is porous and has a certain self-cleaning
effect. The oven bottom, on the other hand is
made of a smooth and rather harder enamel
so that you can scrape off spilled material
with a spatula or something similar.
CATALYSIS ENAMEL
The oven becomes hot when used,
keep an eye on children.
Dirt on the enamel is burnt off to some extent
when the oven is used. If the enamel
becomes patchy, you can burn off the oven at
its highest temperature with top and bottom
heating for 30–60 minutes. Remove stubborn
stains like this:
1 "Drench" the catalysis enamel with
soft soap and hot water. Use a nylon
brush on the marks. Leave it alone
for one hour.
2 Then turn on top and bottom heating
and the highest temperature
3 Switch off the oven after three hours.
Never use cleaning agents or sharp objects
on the catalysis enamel.
on the oven walls and
.
45

Advertisement

Table of Contents
loading

Table of Contents