Output Signal Confi Guration; Dip Switches - Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS User Manual

HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL
There is a bank of 2 dip switches on the underside of the DVI to RGBS with
Scaler unit that controls which type of signal is output. Please remove the
metallic tape on the underside of the unit to reveal this bank of switches. Use the
guidelines below to output your desired signal type.
DIP Switch 1
ON
ON
OFF
OFF
DIP
Switches
OUTPUT SIGNAL CONFIGURATION
DIP Switch 2
ON
OFF
ON
OFF
DIP Switch Positions
ON
ON
OFF
Output Signal Type
R/G/B/S 5V Sync
R/Gs/B/Gs Default
R/G/B/S 0.3V Sync
Y/Pb/Pr/Y Component
KE
1 1 2
10