Charging The Handset; Installing The Charger And Charging The Handset; Cleaning The Battery Charger Contacts - NEC DS1000 User Manual

900 mhz

Hide thumbs Also See for DS1000:

Table of Contents

Installation

Charging the Handset

10 ◆ Chapter 1: Installation

To connect the AC Adaptor to the charger (Figure 8: Installing the Charger):

Run the AC adaptor cord under the strain relief on the back of the charger as shown.

Plug the AC adaptor cord into the charger.

Plug the AC adaptor into AC outlet.

Insert the handset into the charger.

The handset must charge 5-8 hours in its charger prior to initial use.

When the handset is correctly inserted into the charger, the CHARGE LED on the

charger is on.

AC Adaptor

Figure 8: Installing the Charger

To clean the battery charger contacts (Figure 9: Cleaning the Battery Charger Contacts):

●

Use a pencil eraser or soft cloth to periodically (once a month) clean the battery contacts.

Figure 9: Cleaning the Battery Charger Contacts

Strain Relief

DS1000/2000 Cordless Telephone User Guide

Table of Contents

Ds2000