Installing The Battery; Installing The Battery In Your Handset - NEC DS1000 User Manual

Installing the Battery

Installing the Battery in your Handset

To install the battery in your handset (Figure 7: Installing the Handset Battery):
1. Slide the battery cover off of the handset.
2. Insert the battery lead into the battery connector. Be sure to observe the polarity of the connection by lin-
ing up the black dot with the black wire.
3. Turn the battery around to it fits into the battery compartment.
4. Slide the battery cover back onto the handset until it snaps into place.
DS1000/2000 Cordless Telephone User Guide
White wire
Red
wire
Figure 7: Installing the Handset Battery
Installation
Installing the Battery
After inserting jack,
turn battery to fit into
battery compartment
Black wire
Chapter 1: Installation ◆ 9
1