Table of Contents
Advertisement
Installation
Any work required on the cooker
must be carried out by a
. The cooker is heavy. Edges
EXPERT
and corners, with which you do not
normally come into contact, can be
sharp. U
SE GLOVES WHEN MOVING THE
.
COOKER
When delivered, the cooker is
adapted to a bench height of 900 mm.
The cooker has a fixed plinth.
Take care when positioning the
cooker so that it does not block the
ventilation outlets (behind the cooker
and above the hood). The cooker
must not be pushed in under a tiled
edge or similar.
The cooker must have a bench
area on both sides (see "Safety").
Make sure that the cooker cable is
not crushed when the cooker is
moved.
Horizontal adjustment
The cooker must be level so that, for
example, fat spreads evenly in the
frying pan. Place a spirit level or a
frying pan containing water on the
ceramic glass plate when you want to
check whether the cooker is level.
If necessary, from the front of the
plinth, you can adjust the cooker
wheels and feet by 15 mm (0.6"). Use
a screwdriver to adjust the rear
wheels and a Polygrip for the front
feet.
QUALIFIED
50
Advertisement
Table of Contents
