Table of Contents
Advertisement
The Automax function
This cooker is fitted with a special
automatic heating system called
Automax.
The function is engaged each time you
wish to use it. It works like this:
You select the knob setting for the heat
that you consider suitable for cooking/
roasting. The heating zone starts at
the highest heat setting and goes over
automatically to the selected setting
after a certain time.
Cooking/roasting with Automax
This is how you activate the function.
NOTE! This must be done each time
you wish to use the automatic system.
1 Set the function A
appears in the display.
2 Then make the desired setting
for cooking/roasting. It takes
about 5 seconds before A lights
up in the indication area.
The heater zone display shows A. This
implies that the heating zone operates
at maximum heat for a certain time,
depending on the heating setting
selected. See the diagram.
When the time has expired, there is
automatic switch-over to the set value
and the letter A is no longer shown.
If the setting is changed during
heating with A
UTOMAX
disappears and re-setting must be
carried out.
In general it can be said that
settings 2–5 are suitable for cooking
and settings 6–8 for roasting. For heat
retention, setting 1 is suitable. But, as
usual, you must experiment to find the
setting and heating zone that is best
for you and your pots and pans.
, A
UTOMAX
this function
18
Advertisement
Table of Contents
