Super Clean accessories
These accessories have a dirt-
repellent coating and a long life if they
are treated correctly
NOTE! Do not place SUPER CLEAN
accessories on a hot ceramic glass
plate since this can damage them.
The accessories tolerate a
temperature of up to 250°C. Never
heat them without food or dough.
Wash the accessories thoroughly in
hot water and washing-up liquid
before using them for the first time.
If you follow this advice and these
tips, then your SUPER CLEAN
accessories will last for a long time
and remain easy to clean:
•
Use tools made of plastic or
wood instead of metal, which
can damage the plate.
•
Remember that pots and pans
with rough surfaces can
damage the accessories.
•
Clean the accessories with a
soft sponge or a dish-brush in
hot water, with the possible use
of washing-up liquid. Never use
the dishwasher.
•
Never use wire wool or sharp
objects when cleaning.
Oven lighting
NOTE! Before you change the bulb,
make sure that the cooker is
disconnected from the mains.
For cookers with a cable, pull out
the plug. For other cookers, pull
out the multi-pole switch.
Place a cloth on the bottom of the
oven to protect both the bulb and
the glass.
Changing the oven light/cleaning
the protective glass
1 Check that the oven is not hot.
2 Unscrew the protective glass
by turning it to the left and
clean it.
3 If necessary:
Replace the oven light with a
new bulb marked 230–240V,
40W, 300°C, fitted with an E14
base.
4 Re-fit the protective glass.
Replacing the lamp bulb on page
cleaning the protective glass
1 Check that the oven is not hot.
2 Loosen and remove the oven
step units on the left-hand side
(see page 47)
3 Loosen the protective glass
with the aid of a narrow, blunt
object (such as a teaspoon)
and clean it. Hold your hand
under the glass to prevent it
from falling down onto the
bottom of the oven.
4 If necessary:
Replace the oven lighting and
fit a new bulb with an E14 base,
marked 230-240V, 25W och
300° C.
5
Press the protective glass into
position again and fit the step
units.
48