Automatic Call Acceptance; Telephone Volume; Updating The Phonebook - Becker GPS Navigator Operating Manual

Automatic call acceptance

With this function, you can set whether
or not or after which time an incoming
call is accepted automatically.
> In the settings menu, press the
accept call button.
> Select whether incoming calls will be
accepted automatically after 3, 5 or 10
seconds.
Off
If you select , the function is switched
off.
The setting currently selected
indicated with a checkmark (
> Confirm your settings by pressing the
back button .

Telephone volume

With this function, you can set the
volume of the ringtone and the volume
of the call.
> In the settings menu, press the
Auto-
Volume button.
> Select the desired volume with the
and
> Press the
Mute
volume. By pressing the
again, the telephone volume is
is switched back on.
> Confirm your settings by pressing the
).
back button

Updating the phonebook

With this function, you can update or
retransfer the stored phonebook entries
in the Navigation device.
> In the settings menu, press the
Refresh
Be aware that it may take several
buttons. minutes to load the phonebook.
button to mute the
button
.
TELEPHONE MODE
button.
>>>
> D
> GB
> F
> I
> PL
117