Trip Computer (Depending On Model) - Becker GPS Navigator Operating Manual

The road is currently blocked for all days
of the week, for the whole day
can now set whether or not the road
should be blocked for each day of the
week.
> Press the buttons with the days on
which the road should not be blocked
.
> Press the clock symbol under one of
the days and limit the block of this day
to the required time of the day.
1 1
1
2
You can set up to two times when the
road shall be blocked.
> Using the buttons
od when the road is to be blocked on
this day.
> Using the buttons
period when the road is to be blocked
on this day if necessary.
Block 24 h
Press the
. You
for an entire day. Press the
for... button to also use the block on
other days.
> Press again the
confirm the settings and to exit the
menu.
Note:
The duration of the blockages can be
defined also in the
1
in the Navigation settings.
1
set the first peri- Trip computer (depending on
model)
2
set the second
The Trip computer provides a data
display with average speeds, maximum
speeds, etc. and a stopwatch with the
option to record laps.
button to set a block > In the main menu, press
Use setting
> Press the
2
back button to
5
The data display appears.
Blocked roads
menu The data display contains the following
information:
1
2
3
4
5
Extras
Trip computer
button.
1
3 4
7
6
8 9
Current speed (as a number and in
the form of a bar graph)
Maximum speed
Average speed without breaks in the
journey
Average speed with breaks in the
journey
Total distance
TOOLS >>>
> D
> GB
> F
> I
.
> PL
125