The Blocked Roads Button - Becker GPS Navigator Operating Manual

The Blocked roads button

In the Blocked roads settings window
you can unblock previously permanently
blocked roads (See "Blocking a section of
the road permanently" on page 124) or
modify the block (time and days of week
of block).
> In the settings menu, press the
Blocked roads button.
A window is displayed containing the
roads that have previously been blocked.
Note:
To delete all blocked roads from the list,
press the Delete all blockings
followed by the Yes button in the display
that then appears.
> Select the blocked road you want.
The road is currently blocked for all days
of the week, for the whole day
can now set whether or not the road
should be blocked for each day of the
week.
> Press the buttons with the days on
which the road should not be blocked
.
> Press the clock symbol under one of
the days and limit the block of this day
to the required time of the day.
button
You can now set whether or not the road
should be blocked for each day of the
week.
> Confirm your settings by pressing the
back button
or
> Press the
button under one of the
days and set up to two times when the
road should be blocked.
. You
1 1
2 2
> Using the buttons
period when the road is to be blocked
on this day.
> Using the buttons
period when the road is to be blocked
on this day if necessary.
NAVIGATION MODE >>>
> D
> GB
.
> F
> I
> PL
1 1
2
2
set the first
1
set the second
2
81