Bluetooth Name; Text Message Notification (Depending On The Model) - Becker GPS Navigator Operating Manual

>>> TELEPHONE MODE

Bluetooth name

> D
With this function, you can assign a
name for your Navigation device. This
> GB
assigned name will then be displayed by
other Bluetooth devices.
> F
> I
> In the settings menu, press the
> PL
Bluetooth name
> Enter the desired name.
> Confirm the name entered by pressing
OK
the button.
118
Text message notification (depending
on the model)
With this function you can set how the
Navigation device should respond when
a new text message is received.
> In the settings menu, press the
button.
signal
> Choose the required setting.
• No signal
No notification is given.
Play tone only
•
A signal tone will sound.
• Show popup
A menu is displayed in which you can
select whether the message should be
displayed, read out or ignored. See
"Incoming text message" on page 108.
SMS
button.
• Read out automatically
An incoming text message will be read
out automatically.
Note:
The message can only be read out if a
voice tagged with the abbreviation TTS
has been selected. See "Setting the
Voice" on page 77.
> Confirm your settings by pressing the
back button .