Connecting From Device Lists; Connecting A Mobile Phone - Becker GPS Navigator Operating Manual

>>> TELEPHONE MODE
> D
> GB
> F
> I
> Then select the name of the cell phone
> PL
to be connected.
The Navigation device will then attempt
to establish the connection. On the cell
phone, the password prompt should
then occur. This password is fixed by
Navigation device.
> Enter the password displayed on the
cell phone.
The connection will be established. With
a successful connection, the telephone
menu will be displayed.
112

Connecting from device lists

From the device list, you may initiate a
connection to a cell phone. If a cell phone
is already connected, that connection is
automatically disconnected and the new
device is connected.
> Call up the device list.
> Select the cell phone you want in the
list.
The connection is established to the cell
phone selected. With a successful con-
nection, the telephone menu will be dis-
played.

Connecting a mobile phone

You can also attempt to establish a
connection to the Navigation device from
the mobile phone.
If a request is received from a mobile
phone that has not yet been connected,
you will be asked whether you wish to
allow the connection.
> Press the
Yes button to permit the
connection.
> Enter the displayed password (four
zeros) on the mobile phone.
The connection will be established. With
a successful connection, the telephone
menu will be displayed.