Table of Contents
Advertisement
ENGLISH
8.6 Selecting The Desired Massage Action
Your Sundance spa is equipped to allow you to customize
the massage action you desire. Each model incorporates
a diverter valve(s) that allow you to customize the mas-
sage and performance by diverting water between various jet systems.
Simply turn diverter to position A (Combo), B, or C to divert water pressure
to various jet groups. Note: The diverter valve is designed to operate in posi-
tions A (Combo), B, and C for optimum performance. It is considered nor-
mal for sound levels within the valve to vary between positions due to the
large amounts of water flowing through it! For optimum filtration benefits,
leave the valve in position A when spa is covered. Select position B or C for
maximum jet performance during spa use.
In the Optima, Cameo and Marin, one massage
selector controls the therapy jets and whirlpool jets.
The other massage selector controls the therapy
seat jets and vertical jets (foot jets).
In the Altamar, the massage selector on the pump #2
system diverts between the therapy seat and the whirlpool
jets (in the footwell and on the side wall). The pump #1
system powers the therapy jets in the lounge and seats of
the hot tub.
8.7 Adjusting Individual Jet Flow
The water flow to the individual jets in your hot tub can be increased or
decreased by rotating the outside face of the jet. Note: Always keep at least
6 adjustable jets open at all times.
8.8 Adjusting Intelli-jets
With the nozzles of the Intelli-Jets positioned straight ahead, the jet stream will
be stationary. Pushing the nozzle to one side causes the jet nozzle to rotate,
moving the jet stream in a circular pattern. The speed of rotation and volume
of water flow can be adjusted by rotating the jetface.
8.9 Air Controls
Each jet system has its own air control. These controls allow you to
regulate the amount of air which is mixed with the water entering
through the jets. Clockwise rotation adds more air and counterclock-
wise rotation reduces air flow. To minimize heat loss, these controls should be
closed when the hot tub is not in use.
Page 15
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
