Jets 2 - Sundance Spas 850Export Series Installation & Owner's Manual

8.5 Jets 2 - On models with two jet pumps, JETS 2 controls the
high-speed pump #2.
Auto Turn Off — Anytime a pump has been manually turned on, it will
automatically turn off after approximately 20 minutes. If at this time you
desire more jet operation you may simply turn the pump(s) back on.
These display temperature
setting and increase or decrease
temperature setting and other
programmable features.
Inverts the Controls the hot tub
main 4-digit light (bright, dim,
display. dimmer, off).
Indicates panel, set
temperature or filter
cycle programming locked.
These characters identify
what is being shown on the
main 4-digit display
Indicates hot tub light
is on (changes accord-
ing to brightness
selected).
Figure-D, Command Center
Scrolls menu through filter
cycle programming features.
Controls the air
blower (On,
Off).
Figure-E, LCD Display
Indicates heater is on. Indicates optional ozone
(page 1 1). generator is on (page 33).
Indicates air injec-
tor system is on.
Accesses filter cycle
program mode.
Select
Cycle
Mode
Display
Controls pump #1 Controls pump #2
(On, Off). (N/A Capri).
Indicates pump #1 is
on (flashes during
auto operation).
ENGLISH
Switches between
standard and economy
modes. (page 10).
Displays time of day and
initiates time setting and
locking functions.
Indicates filter cycle in progress
or displays cycle programming
features (page 24).
Indicates operating
mode selected (page
10).
Indicates pump #2
is on (N/A Capri).
Page 13