Selecting The Desired Massage Action; Adjusting Fluidix Reflex And Intelli-Jets - Sundance Spas 880 Series Owner's Manual

10.7 Selecting The Desired Massage Action

Your Sundance
customize the massage action you desire. Each model
incorporates a massage selector(s) that allows you to
customize the massage and performance by diverting water between
various jet systems. Simply turn massage selector to position A (Combo),
B, or C to divert water pressure to various jet groups.
Note: This valve is designed to operate in positions A (Combo), B, and C
for optimum performance. It is considered normal for sound levels within
the valve to vary between positions due to the large amounts of water
flowing through it! For optimum filtration benefits, leave the valve in posi-
tion A when hot tub is covered. Select position B or C for maximum jet
performance during hot tub use.
10.8 Adjusting Fluidix Reflex, ST And Intelli-Jets
These jets in your new hot tub offer the advantage of no moving parts
and zero maintenance. They can also be adjusted for a high and low
impact massage, providing the ultimate massage!
To Adjust Jets
1. Fluidix Intelli-Jet and Reflex only : Turn outer dial (A)
clockwise to increase water volume. Turn outer dial
counterclockwise to decrease water volume or to
shut jet off.
2. Fluidix Intelli-Jet only: Rotate center "mode disk" (B)
clockwise to select a non-oscillating water stream or
turn counterclockwise to select an oscillating stream
at any angle.
3. For a high impact massage, turn corresponding air
control knob clockwise. For the Fluidix ST, jet this will
create a straight water flow. For low impact massage,
turn corresponding air control knob counterclockwise.
For the Fluidix ST, jet this will create an oscillating flow.
Refer to Sections 10.13-10.26 (pages 34-47) for spe-
cific operation details.
Note: Always keep at least 6 adjustable jets open at all
times on each jet system.
®
hot tub is equipped to allow you to
B
A
Fluidix Intelli-Jet
A
Fluidix Reflex Jet
Fluidix ST Jet
Page 31