Messages And Error Codes; User Attendance Messages - Lexmark E360d Service Manual

4513-420, -430

Messages and error codes

User attendance messages

The printer control panel displays messages describing the current state of the printer and indicates possible
printer problems that must be resolved. This topic provides a list of all printer messages, explains what they
mean, and tells how to clear the messages.
The following table lists the messages in alphanumerical order. A message can also be located using the index.
User attendance messages
Message
Activating Demo Mode
Activating Menu Changes
Activating/Deactivating PPDS
Busy
Cancelling Job
Change Cartridge Invalid Refill
Close door
Deactivating Demo Mode
Defragmenting Flash DO NOT POWER OFF
Disabling Menus
Enabling Menus
Flushing Buffer
Formatting Flash DO NOT POWER OFF
Invalid Engine Code
Invalid Standard Network Code
Load manual feeder with <Custom Type>
Load manual feeder with <Custom
String>
Load manual feeder with <size>
Load manual feeder with <size> <type>
2-6
Lexmark™ E360d, E360dn
Action
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear, or cancel the print job.
Wait for the message to clear.
The printer has detected an unsupported refilled cartridge. Remove the
indicated print cartridge, and install a new one.
Close the specified door to clear the message.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Wait for the message to clear.
Note: The printer settings cannot be changed from the control panel while
the menus are disabled.
Wait for the message to clear.
Wait for the message to clear.
Warning: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
Download valid engine code to the printer.
The code in an internal print server is not valid. The printer cannot receive
and process jobs until valid code is programmed into the internal print
server. Download valid code to the internal print server.
Note: The network code can be downloaded while this message is
displayed.
• Load the specified media in the manual feed tray or multipurpose
feeder.
• To ignore the manual feed request and print on media already
installed in one of the input sources, press
If the printer finds a tray that has media with the correct media type
and size, then it feeds media from that tray. If the printer cannot find
a tray with the correct media type and size, then it prints on
whatever media is installed in the default input source.
• Cancel the current job.
.