To Place A Call On Remote Hold - NEC Dterm I Series User Manual

TO PLACE A CALL ON REMOTE HOLD

To initiate:
While in conversation with Station/Trunk Party
•
Press the TRANSFER
•
Dial destination station's extension
•
Receive ring back tone.
•
Press the Hold
•
extension)
Hang up.
•
To retrieve at destination:
Lift handset or press
•
Press line on hold. Use handset to converse.
•
NOTE: Any station with the destination line appearance can retrieve the
call.
To retrieve from phone without destination line appearance:
Lift handset or press
•
Dial Access Code for Direct Call Pick-Up
•
Dial destination station's extension
•
Use handset to converse
•
key Receive interrupted dial tone
.
key. (Call is placed on hold at the destinations station's
Speaker key.
Speaker key
- 28-
.