To Place A Call On Hold - NEC Dterm I Series User Manual

TO PLACE A CALL ON HOLD

Press Hold
•
NOTE: If held line appears on other Dterm stations,
the associated LED flashes red slowly.
To retrieve:
Lift handset or press
•
Press held line. Use handset to converse.
•
NOTE: Any station with this line appearance can retrieve the call.
If unanswered:
After preprogrammed time, Automatic Recall is initiated.
•
Visual and audible signal (rapid flash and ring burst) is sent to station that
•
placed call on hold.
NOTE: Hold shows as a flashing green LED on your phone.
The same line on other phones shows as a flashing red LED.
Recall shows as a flashing green LED on your phone and
flashing red LED on other phones with the same line.
key. Held line wink flashes.
Speaker key.
- 26-