Table of Contents
Advertisement
20
Basic operations
Basic operations
Turning the display on or off
To turn on or off the display, press the Power button on the
display's control panel or on the remote control.
Notes:
• The display's standby mode still consumes power. To completely cut
off power supply, set the power switch to the off position or disconnect
the power cord from the power outlet.
• The display follows the VESA approved DPM Power Management
function. The power management function is an energy saving feature
that automatically reduces the display's power consumption when the
keyboard or the mouse has not been used for a fixed period.
Locking/unlocking the controls
You can lock/unlock the control panel to prevent unwanted or accidental operations.
Control panel buttons
To lock/unlock the control panel buttons, press and hold the
panel simultaneously for at least 5 seconds. Once locked, the control panel buttons do not
function unless unlocked.
Remote control functions
To lock/unlock the remote control functions, press and hold the MENU and
control panel for at least 5 seconds. Once locked, the display does not respond to any remote
control operations unless unlocked.
To lock/unlock both the control panel and remote control buttons, press the
5 seconds, and then the ENTER button on the remote control. Once locked, the control panel and
remote control buttons do not function unless unlocked.
Switching input signals
Press the INPUT button or those signal selection buttons on the remote control or the INPUT
button on the control panel to select an input signal.
Adjusting audio volume level
Press the
/- or
control to adjust the volume.
/+ button on the control panel, or the VOL+ or VOL- button on the remote
/- and
/+ buttons on the control
/- buttons on the
button for at least
Advertisement
Table of Contents
