Planar PS4652 User Manual page 29

Alert report - thermal error
If the display's ambient temperature exceeds 50
alert report will be generated and sent to the specified recipient. Below is an example of the
format and content of the report.
Thermal Error
[Display]
Model Name: (Model name of the display)
Serial No.: (Serial number of the display)
[STATUS]
Power Status: Power On
Video Source: HDMI
PAP Enable: Off
[Network]
IP Address: xx.xx.xx.xx
Subnet Mask: xx.xx.xx.xx
Gateway: xx.xx.xx.xx
Primary DNS: xx.xx.xx.xx
Secondary DNS: xx.xx.xx.xx
MAC Address: xx:xx:xx:xx:xx:xx
[Other Information]
Scaler F/W Version: x.x
Lan F/W Version: x.xx Revx
Operation: 0000008H
If a thermal error alert occurs, turn off the display and check if the space or passage around the
display for heat dissipation is blocked. Improve ventilation and air circulation around the display if
necessary.
Network connection
o o
C (122 F) for over 30 seconds, a thermal error
27