Basic Operations; Turning The Display On Or Off; Locking/Unlocking The Controls; Control Panel Buttons - Planar PS Series User Manual

22

Basic Operations

Basic Operations

Turning the Display On or Off

To turn on or off the display, press the power button on the
display's control panel or on the remote control.
Notes:
• The display's standby mode still consumes a very small amount
of power. To completely cut off the power supply, press the
power switch to trun off the main power.
• The display follows the VESA approved DPM Power
Management function. The power management function is an
energy saving feature that automatically reduces the display's
power consumption when the keyboard or the mouse has not
been used for a fixed period.

Locking/Unlocking the Controls

The display's controls can be locked and unlocked to prevent unwanted or accidental
operations. These commands are used for locking and unlocking.

Control Panel Buttons

Press and hold  and  simultaneously for 5 seconds. Once locked, the control panel
buttons do not function unless unlocked.

OSD Menu Function

Press and hold  and  simultaneously for 5 seconds. Once locked, the
the control panel does not function, and the OSD menu can not be used unless unlocked.

Power On/Off Function

Press and hold
panel does not function, and current power on/off status will be kept unless unlocked.

Remote Control Functions

Press and hold
any remote control operations unless unlocked.

Switching Input Signals

Press the
VGA
button on the control panel to select an input signal.
INPUT

Adjusting Audio Volume Level

Press / on the control panel or
and  for 5 seconds. Once locked, the power button on the control
MENU
and  for 5 seconds. Once locked, the display does not respond to
MENU
, , , ,
DVI HDMI YPbPr AV
and buttons on the remote control or the
INPUT
VOL+/VOL- on the remote control to adjust the volume.
MENU button on