Setting Menu - Planar PS4652 User Manual

38 The OSD (On-Screen Display) menu

Setting menu

Item
Language Sets your preferred language for the OSD menu.
• Date and Time: Sets the current date and time.
• Clock Display: Sets whether to show the current time which was set.
• Input: Sets an input source to display when the display is automatically turned on next
time.
Schedule • On/Off Timer: Sets when to turn on or off the display.
Notes:
• Set the current time before you set the On/Off Timer.
• When schedule settings overlap, the Everyday setting takes priority over other weekly
settings.
Sets the display to enter the power saving mode when there is no signal detected.
• Standard: All sources can enter the power saving mode and wake up the display.
• ECO: All sources can enter the power saving mode, but only a VGA signal can wake up
the display or you have to press the power button to wake up the display when other
sources are connected.
Power Save
• Off: If no source is detected, the backlight will continue on.
Note:
• RS-232C can bring any mode out of the power saving status.
• On Power Save setting ECO, the LAN function is not available if the monitor enters Power
Save, or DC off mode.
• RS-232C/LAN: Sets a terminal to control the display.
• IR: Select it when multiple displays are connected via RS-232C cables.
Control
Setting
Note:
• To reset to the default settings (RS-232C) for Control Setting, press the INFO button on
the remote control for 5 seconds.
• The power of the secondary display can not be turned on by the control signal received from
the primary display.
Network
See "Network connection" on page 21 for details.
Settings
Setting
Language
Schedule
Power Save
Control Setting
Network Settings
Set Monitor ID
HDMI Control
Advanced
Information
All Reset
:Move
- Primary: Designate the display as the primary unit for remote control operation.
Only this display will be operated by the remote control.
- Secondary: Designate the display as the secondary unit. The display can not be
operated by the remote control, and will only receive the control signal from the
primary display via the RS-232 connection.
:Enter
ENTER
Description
English
ECO
RS-232C
01
Off
:Exit
EXIT