Basic Operation And Calibration/Reset Instructions - Planar PCT2495 User Manual

Basic Operation and Calibration/Reset Instructions

Before using the Touch LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/O
To turn the Touch LED LCD Monitor on/o :
Press Power button on the front right side. The power LED indicator light will be blue when
the Touch LED LCD Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touch LED LCD
Monitor.
1
2
▼
▲
▼ + ▲
OSD Lock Out Function
When Touch LED LCD Monitor is in normal mode, the "OSD Lock Out" function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the "POWER" button.
Press and hold the 1 button and the ▲ button for 3 seconds to lock the OSD buttons.
The Touch LED LCD Monitor will show an "OSD LOCKED" message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
Displays main menu
Exits from OSD menu
Selects between HDMI, DisplayPort or Auto mode
Select the desired item when in OSD menu
When not in OSD menu, directly enters Audio adjust menu
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset mode
Recalls both Contrast and Brightness (when not in OSD menu)
10