Network Connection; Connecting The Display To A Local Area Network - Planar PS4652 User Manual

Network connection

Connecting the display to a local area network

To set the display to connect to a local area network (LAN):
1. Connect a RJ45 cable to the corresponding ports on the display and your LAN switch or
router.
2. Open the OSD menu. Go to Setting > Control Setting and select LAN.
3. Go to Setting > Network Settings and perform either of the following settings according to
your network environment. You may need to contact your network administrator for
assistance on these settings.
- If you are in a DHCP environment (the IP address of the display will be automatically
assigned by a DHCP server), select DHCP > Execute and press the ENTER button on the
remote control. Once the display is successfully connected, the IP Address, Subnet Mask,
Default Gateway, Primary DNS, and Secondary DNS information will be displayed.
- If you are not in a DHCP environment (the IP address of the display has to be configured
manually), select Manual > Execute and press the ENTER button on the remote control.
Contact your network administrator for information on the IP Address, Subnet Mask,
Default Gateway, Primary DNS, and Secondary DNS settings and enter them accordingly.
4. To save the settings and return to the previous menu, highlight Execute and press the
ENTER button on the remote control.
Network connection 21