Cleaning The Water Tanks - Philips AquaTrio FC7070 User Manual

Clean the mopping brush cover under a tap.
5
Note:
D
Do not use a scouring pad or an abrasive
cleaning agent to clean the mopping brush
cover, as this may cause scratches on the
surface. Dirt may accumulate in the scratches.
This dirt buildup may eventually hinder the
flow through the mopping nozzle.
Put the mopping brushes on the clean
6
mopping brush cover to dry. To ensure proper
drying, place one end of the brushes on the
rim of the mopping brush cover. Drying can
take approximately 24 hours.
Note:
D
If the mopping brushes are still too wet, the
active protection system will be activated as
soon as you switch on the appliance.
Clean the inside of the mopping nozzle and
7
the mopping nozzle lid with a damp cloth.
16
Caution:
C
The mopping brushes are not dishwasher-proof
or washing machine-proof.
Caution:
C
Do not clean the mopping brushes with a sharp
object, as this may damage the brush hairs and
reduce the cleaning performance of the mopping
brushes.

6.3 Cleaning the water tanks

6.3.1 Cleaning the clean water tank
Although it is safe to leave water in the clean
water tank, we advise you to empty the tank
before you store the appliance.
switch off the appliance, place the appliance
1
upright in parking position ('click') and pull the
plug out of the wall socket.
Remove the clean water tank (see chapter
2
'Preparing for use', section 'Filling the clean
water tank').
If you want, you can clean the clean water
3
tank under the tap. You can also clean the
clean water tank in the dishwasher.
Place the clean water tank back into the
4
appliance (see chapter 'Preparing for use',
section 'Filling the clean water tank').