Product Maintenance And Care; Main Unit Maintenance; Floor Nozzle Maintenance; Cleaning Out The Dirty Water Tank - Philips Cordless Wet & Dry Vacuum 4000 Series User Manual

7

Product maintenance and care

Note: Before maintenance and care, disconnect the unit from the socket and turn off the power, then
remove the battery.

Main unit maintenance

•
For daily maintenance, just wipe off any dust on the main unit gently with a dry cloth. Do not wash the
main unit with water.

Floor nozzle maintenance

•
Before carrying out maintenance, turn the unit off and remove the
battery, clean water tank, and dirty water tank. Wipe the wheels,
scrapers, and infrared sensor with a damp cloth.

Cleaning out the dirty water tank

•
Remove the dirty water tank and open its upper cover. Rinse the inside of the dirty water tank with clean
water.
1

Cleaning the filter element/filter

•
Remove the filter unit from the dirty water tank cover, then rinse the filter element with clean water.
Tip:
1 It is a good idea to replace the filter every six months.
2 The filter takes a long time to dry so you can alternate between two filters.
English
14
2
1