Smtp Setup Menu - Lexmark T656dne User Manual

Understanding printer menus
Menu item
Baud
1200
2400
4800
9600
19200
38400
57600
115200
138200
172800
230400
345600
Data Bits
7
8
Parity
Even
Odd
None
Ignore
Honor DSR
On
Off

SMTP Setup menu

Use the following menu to configure the SMTP server.
Menu item
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Description
Specifies the rate at which data can be received through the serial port
Notes:
•
9600 is the factory default setting.
•
138200, 172800, 230400, and 345600 baud rates are displayed only in the
Standard Serial menu. These settings do not appear in the Serial Option or
Serial Option 2 menus.
Specifies the number of data bits that are sent in each transmission frame
Note: 8 is the factory default setting.
Sets the parity for serial input and output data frames
Note: None is the factory default setting.
Determines whether the printer uses the DSR Signal. DSR is a handshaking signal used
by most serial cables.
Notes:
• Off is the factory default setting.
• The serial port uses DSR to distinguish data sent by the computer from data
created by electrical noise in the serial cable. The electrical noise can cause
stray characters to print. Select On to prevent stray characters from printing.
•
This menu item appears only if Serial RS‑232/RS‑422 is set to RS 232.
Description
Specifies SMTP server port information
Note: 25 is the default SMTP gateway port. The range of possible port
numbers is 1‑65536.
Specifies the amount of time in seconds before the server stops trying to
send the e‑mail
Note: 30 seconds is the factory default setting.
116