Disk Corrupted; Enabling Menus - Lexmark T656dne User Manual

Understanding printer messages 145
Disabling DLEs
Wait for the message to clear.
Disabling Menus
Wait for the message to clear.
Note: While the menus are disabled, printer settings cannot be changed from the printer control panel.

Disk corrupted

The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard
disk must be reformatted.
Touch Reformat disk to reformat the hard disk and clear the message.
Note: Reformatting the disk deletes all the files currently stored on the disk.
Disk recovery x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is attempting to recover the printer hard disk.
Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.

Enabling Menus

Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.
Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Error reading USB drive
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Flushing buffer
Wait for the message to clear.