Paper Trays; 2000-Sheet Tray - Lexmark T656dne User Manual

Troubleshooting
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED CORRECTLY
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, then reinstall it. For more information, see the hardware setup documentation that came with the option, or
see the latest comprehensive User's Guide available on our Web site at www.lexmark.com/publications.
M
AKE SURE THE OPTION IS SELECTED
From the computer you are printing from, select the option. For more information, see
in the printer driver" on page

Paper trays

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Open the paper tray.
2
Check for paper jams or misfeeds.
3
Make sure paper guides are aligned against the edges of the paper.
4
Make sure the paper tray closes properly.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
M
AKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY
If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not
be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that
came with the paper tray, or see the latest comprehensive User's Guide available on our Web site at
www.lexmark.com/publications.
M
AKE SURE THE LIST OF OPTIONS IN THE PRINTER DRIVER IS UP TO DATE
From the computer you are printing from, verify that the paper tray is among the options listed in the printer driver.
For more information, see
2000‑sheet tray
These are possible solutions. Try one or more of the following:
T
HE ELEVATOR TRAY IS NOT WORKING PROPERLY
•
Make sure the printer is properly connected to the 2000‑sheet tray.
•
Make sure the printer is turned on.
42.
"Updating available options in the printer driver" on page
"Updating available options
42.
174