Lexmark T656dne User Manual page 120

Understanding printer menus
Menu item
Automatic Method
Single pass
Multiple pass
Manual Method
Single pass
Multiple pass
Scheduled Method
Single pass
Multiple pass
Description
Disk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Automatic Wiping marks all disk space used by a previous job and does not permit
the file system to reuse this space until it has been sanitized.
Only Automatic Wiping enables users to activate disk wiping without having to take
the printer offline for an extended amount of time.
Notes:
•
This menu item appears only if a formatted, non-defective printer hard disk is
installed.
•
Single pass is the factory default setting.
• Highly confidential information should be wiped using the Multiple pass
method only.
Disk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without first having to wipe it.
Notes:
•
This menu item appears only if a formatted, non-defective printer hard disk is
installed.
•
Single pass is the factory default setting.
•
Highly confidential information should be wiped using the Multiple Pass
method only.
Disk Wiping erases only print job data that is not currently in use by the file system
from the printer hard disk. All permanent data on the printer hard disk is preserved,
such as downloaded fonts, macros, and held jobs.
Both manual and scheduled wiping allow the file system to reuse marked disk space
without first having to wipe it.
Notes:
• This menu item appears only if a formatted, non-defective printer hard disk is
installed.
• Single pass is the factory default setting.
•
Highly confidential information should be wiped using the Multiple Pass
method only.
•
Scheduled wipes are initiated without displaying a user warning or
confirmation message.
120