Setting Your Changes As A New Default; Restoring All Settings To The Factory Default - Brother MFC-J4510DW Advanced User's Manual

Setting your changes as a
new default
You can save the print settings you use most
often by setting them as the default settings,
such as Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print. These
settings will remain until you change them
again.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Press your new setting.
Repeat this step for each setting you
want to change.
j
After changing the last setting, swipe up
or down, or press a or b to display
Set New Default.
k
Press Set New Default.
l
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
m
Press .
Printing photos from a memory card or USB Flash memory drive
Restoring all settings to the
factory default
8
You can restore the PhotoCapture settings
you have changed back to the factory default
for, Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print.
a
b
c
d
e
f
g
h
i
j
k
l
Open the media slot cover.
Put the memory card or USB Flash
memory drive in the correct slot.
Press Photo.
Swipe left or right to display
View Photos.
Press View Photos.
Press OK.
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
Press OK.
Press Print Settings.
Swipe up or down, or press a or b to
display Factory Reset.
Press Factory Reset.
The Touchscreen asks you to confirm to
change back to the factory default.
Press Yes to confirm.
Press .
8
8
63