Ink Save Mode; Thin Paper Copy - Brother MFC-J4510DW Advanced User's Manual

Ink Save Mode

Ink Save Mode can help you save ink. The
machine prints the colours lighter and
emphasises the outlines of the images as
shown below:
The amount of ink saved will vary depending
on the document.
Ink Save Mode: Off
Ink Save Mode: On
(The above screens are used in ISO/IEC
24712.)
a
Load your document.
b
Press Copy.
c
Enter the number of copies you want.
d
Press Options.
e
Swipe up or down, or press a or b to
display Advanced Settings.
f
Press Advanced Settings.
g
Swipe up or down, or press a or b to
7
display Ink Save Mode.
h
Press Ink Save Mode.
i
Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j
If you do not want to change any
additional settings, press Mono Start
7
or Colour Start.
NOTE
• Book Copy, Thin Paper Copy,
Page Layout, Watermark Copy and
Remove Background Colour are not
available with Ink Save Mode.
• Ink Save Mode may make your
printouts look different from your original
document.

Thin Paper Copy

7
If your document is a 2-sided Copy on thin
paper, choose Thin Paper Copy so the
print on the other side does not bleed
through.
a
Load your document.
b
Press Copy.
c
Enter the number of copies you want.
d
Press Options.
e
Swipe up or down, or press a or b to
display Advanced Settings.
f
Press Advanced Settings.
g
Swipe up or down, or press a or b to
display Thin Paper Copy.
h
Press Thin Paper Copy.
i
Read and confirm the displayed list of
settings you have chosen, and then
press OK.
Making copies
7
7
43