Additional Dialling Operations; Combining Address Book Numbers - Brother MFC-J4510DW Advanced User's Manual

Chapter 5
Additional dialling
operations
Combining Address Book
numbers
Sometimes, you may want to choose from
several long-distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Address Book numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Address Book
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Basic User's Guide: Storing Address
Book numbers.)
For example, you might have stored '01632'
on Address Book: Brother 1 and '960555' on
Address Book: Brother 2. You can use them
both to dial '01632-960555' as shown in the
following example:
a
Press Fax.
b
Press Address Book.
c
Swipe up or down, or press a or b to
display the number of Brother 1.
d
Press the number.
e
Press Apply.
f
Press Address Book.
g
Swipe up or down, or press a or b to
display the number of Brother 2.
h
Press the number.
i
Press Apply.
j
Press Fax Start.
You will dial '01632-960555'.
32
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad. For example, to
5
change the number to 01632-960556, you
could enter the number (Brother 1: 01632)
using Address Book, press Apply and
then press 960556 using the dial pad.
5
NOTE
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Pause. Each key press adds
a 3.5 second delay. You can press Pause
as many times as needed to increase the
length of the pause.