Real Time Transmission - Brother MFC-J4410DW Advanced User's Manual

NOTE
• If you did not use up any of the numbers
for Groups, you can "broadcast" faxes to
as many as 200 different numbers.
• The machine's available memory will vary
depending on the types of jobs in the
memory and the number of locations used
for broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press
the pages scanned so far.
Cancelling a Broadcast in progress
a
Press .
b
Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
 To cancel the current job, press the
number being dialled on the
Touchscreen. Go to step d.
 To exit without cancelling, press
c
When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without cancelling, press No.
d
Do one of the following:
To cancel the current job, press Yes.

 To exit without cancelling, press No.
to cancel or OK to send
Sending a fax (MFC models only)

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Load your document.
b
Press
c
Press Options.
3
d
Press s or t on the Touchpanel to
display Real Time TX.
e
Press Real Time TX.
f
Press On (or Off).
g
Press OK.
h
Enter the fax number.
i
.
Press Fax Start.
NOTE
• If you are sending a colour fax or if the
memory is full and you are sending a
monochrome fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
(Fax).
3
3
13