Brother MFC-J4410DW Advanced User's Manual page 50

Chapter 7
NOTE
• 2in1(ID), Poster, Book Copy and
Fit to Page are not available with
2-sided Copy.
• You can use only A4, A5 or Letter size
plain paper.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies you want.
d
Press Options.
e
If you want to sort multiple copies, press
s or t on the Touchpanel to display
Stack/Sort.
f
Press Stack/Sort.
g
Press Sort.
h
Press s or t to display
2-sided Copy.
i
Press 2-sided Copy.
j
Press s or t to display the 2-sided
copy layout you want to use, and press
Portrait LongEdgeFlip,
Landscape LongEdgeFlip,
Portrait ShortEdgeFlip or
Landscape ShortEdgeFlip.
k
(MFC-J4410DW and MFC-J4610DW)
Press OK after reading the message on
the Touchscreen.
l
Press OK.
m
Press Mono Start or Colour Start.
If you placed the document in the ADF
the machine scans the pages and starts
printing.
1
MFC-J4410DW and MFC-J4610DW only.
If you are using the scanner glass, go
to step n.
44
n
The Touchscreen shows:
Set the next page, then
press Scan. When you finish,
press Complete.
Place the next page on the scanner
glass and press Scan.
Press OK.
The machine starts printing.
o
If you pressed Sort for multiple copies,
repeat step n for each additional page.
After all the pages have been scanned,
press Complete.
The machine starts printing.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
NOTE
If your document causes paper jams, try
using one of the special 2-sided copy
settings. Press Advanced after step i.
Press s or t to choose 2-sided1 or
2-sided2.
2-sided1 helps avoid paper jams when
copying by allowing more time for the ink
to dry. Choosing 2-sided2 allows more
time for the ink to dry while also using less
ink.
1
,